Pv Value in a Seal Questions and Answers

Pv Value in a Seal Questions and Answers Question 1 (4 marks) List 4 important parameters (not the equation parameters) that are determined by the Pv value in a seal. The suitability of material combinations for the seal faces. The amount of heat generated at the face It also follows that at a given rotational speed An increase in shaft diameter since implies an increase in the Pv value. Assessor Feedback Question 2 (4 marks) The contact property of the interface is influenced by which component in a seal unit? What is the need for seal balance? The fluid pressure in the axial direction is the only pressure component influencing the contact property of the interface. The fluid pressure in the axial direction is the only pressure component influencing the contact property of the interface. Thus, only this component is considered for seal balance and further used to compute the resulting contact force acting on the face. Assessor Feedback Question 3(8 marks) Given the following data, calculate the face area, spring pressure and balance ratios (external and internal) of a seal, for both externally acting and internally acting pressures. Is this Balanced or Unbalanced and why? Seal face contact outer diameter, D = 61.8 mm Effective seal balance diameter, B = 52.6 mm Deal face contact inner diameter, d = 49.2 mm Spring force at working length, F =188 N Calculate the face area of the seal: Α=à Ã¢â€š ¬(D_0^2-D_1^2 )/4 Α=à Ã¢â€š ¬(à £Ã¢â€š ¬-68.2à £Ã¢â€š ¬-^2-à £Ã¢â€š ¬-49.2à £Ã¢â€š ¬-^2 )/4 =1098.46 à £Ã¢â€š ¬-mmà £Ã¢â€š ¬-^2 A=0.001098à £Ã¢â€š ¬- mà £Ã¢â€š ¬-^2 Calculate the spring pressure: P_sp=F_sp/A =188/0.00109846 =171148.7 à £Ã¢â€š ¬-N/à £Ã¢â€š ¬-_(m^2 ) =P_sp 0.17115 MPa Calculate the balance ratio for the external loading: B=(D_0^2-D_b^2)/(D_0^2-D_t^2 ) Α=(à £Ã¢â€š ¬-61.8à £Ã¢â€š ¬-^2-à £Ã¢â€š ¬-52.6à £Ã¢â€š ¬-^2)/(à £Ã¢â€š ¬-61.8à £Ã¢â€š ¬-^2-à £Ã¢â€š ¬-49.2à £Ã¢â€š ¬-^2 ) =1052.48/1398.6 B=0.753 (B Calculate the balance ration for the internal loading B=(D_b^2-D_t^2)/(D_0^2-D_t^2 ) Α=(à £Ã¢â€š ¬-52.6à £Ã¢â€š ¬-^2-à £Ã¢â€š ¬-49.2à £Ã¢â€š ¬-^2)/(à £Ã¢â€š ¬-61.8à £Ã¢â€š ¬-^2-à £Ã¢â€š ¬-49.2à £Ã¢â€š ¬-^2 ) =346.12/1398.6 B=0.25 (B Assessor Feedback Question 4 (4 marks) From the following single mechanical seals, identify the 7 sealing components and other mechanical components, briefly describing their functions? 1)Mating Ring. 2)Primary Sealing Ring. 3) O-ring. 4) O-Ring. 5) Disc. 6) Spring. 7) Retainer. Fluid is to be kept from escaping where the shaft extends through the housing, especially as the shaft rotates. A ring, part 1, with an O-ring, part 4, is sealed against the housing of the container. It is called the mating ring. Another ring, part 2, with an O-ring, part 3, is mounted onto the shaft. It is called the primary sealing ring. The contacting faces of these rings are lapped flat, within light bands. Initial contact between the faces is maintained by a spring, part 6, which pushes them together. The spring reacts against a retainer, part 7 Assessor Feedback Question 5 (4 marks) What difference do you notice between the two mechanical seals shown below. Name them and describe their application. Shows of an outside balanced seal. The shaft packing is forced against the retainer, leaving an area under the seal ring exposed to stuffing box pressure. The closing force exerted by the stuffing box pressure, acting against the shoulder of the seal ring, is slightly greater than the opening force exerted by the liquid film between the faces, thereby keeping the faces in contact at all times. Inside balanced seal illustrates a conventional inside seal that has been balanced. Notice that a step in the shaft has allowed the sealing face of the mating ring to be moved radially inward without decreasing the width of the face itself. The primary sealing ring remains mounted on the original shaft diameter, which means that the closing force remains unchanged. Because we have successfully exposed more of the primary sealing ring face to hydraulic pressure working to open the seal, the design is considered balanced. Assessor Feedback Question 6 (4 marks) Name the primary sealing elements in a single mechanical seal. 1) Primary sealing surfaces. 2) Secondary sealing surfaces. 3) a means of actuation. 4) a means of drive. Assessor Feedback Question 7 (4 marks) While its accepted that solid alumina ceramic seal rings will be considerably more expensive than ceramic coated steel rings, why should they be the preferred choice between the two types of seal ring? When handling corrosive fluids at moderate pressures and velocities: alumina ceramics may be employed as thin coatings or solid rings (preferred!!) For highly corrosive fluids: high purity ceramic alumina can be used. Alumina ceramics have: Relatively low tensile strength Poor resistance to thermal shock Low thermal conductivity High elasticity modulus Assessor Feedback Question 8 (4 marks) Which dynamic secondary sealing element is the preferred type to handle axial movement? Give reasons for your answer. What type of damage does a wedge type secondary seal do to pump shafts/sleeves? Explain how this mechanism works. The pusher type of mechanical seals move axially along the rotating shaft or the sleeve to maintain the contact with the faces of the seal. This feature of these seals helps compensate for the wearing that may occur at the seal face, and wobbling due to misalignment. The pusher types of mechanical seals are used commonly, are less expensive and are easily available in the market in wide range of sizes and designs. The only disadvantage of these seals is that they tend to hang up and sometimes there is fretting of the shaft. Pusher seals utilize a dynamic secondary seal which moves axially with the major seal face. which is either an O-ring, wedge or other type of equipment, across the shaft as a means of compensation for face wear and/or shaft movement. For high temperature (up to 500 deg F) or aggressive chemicals a Teflon wedge ring may be used. Since Teflon is plastic and does not rebound like elastomer, it has to be pushed by spring force into the wedge shaped opening to maintain a seal on the shaft. Non-Pusher type or Bellow seals have no dynamic secondary seal under the movable seal ring. Check Which dynamic secondary sealing element is for axial movement. Operation does not cause shaft wear pusher type seals can handle bi-directional shaft rotation, large pressure, temperature and speed excursions. Assuming a spring-loaded Teflon wedge can also be used as a dynamic shaft seal behind the rotating primary seal ring. The spring and process pressures keep the wedge in contact with the shaft. Like chevrons and U-cups, wedges can only seal in one direction. Because of the tendency for Teflon to cold flow, almost all wedges need to be loaded by one or more springs along with the process pressure. Wedge seals often cause shaft damage by fretting. Assessor Feedback Question 9 (4 marks) What is the distinct advantage offered by a bellows seal? How can the design be improved to accommodate higher pressures? Which bellows material offers the best corrosion resistance? One of the most frequent and serious problems valves face is gland leakage, results in wasted and increased plant downtime. Apart from the high cost of energy losses, Gland leakages can also cause serious environmental, ecological and health hazards to plant workers and personnel. Leakage of sensitive material can also constitute to a fire hazard, explosion, or damage to equipment by corrosive material. Air entering the pipeline could produce inflammable explosive or poisonous mixtures. Gland packed valves often demand continual maintenance in accessibility creating particular difficulties. The bellows comply to conditions at high temperatures and are capable of withstanding over 10,000 cycles without failure. Bellow Seals are also known as Zero Leak Valves or Emission Free Valves The multi-ply bellow design is preferred for handling higher pressure fluids (generally two or three plies of the metal wall). A two ply bellow can increase its pressure rating by 80% to 100% as compared to a single ply bellow of the same thickness. Alternatively, if a single ply bellow of a thickness equivalent to a pressure rating of a two ply bellow is used, the stroke length is reduced. Thus, a multi-ply bellow design offers a distinct advantage over a single ply bellow. The stainless steel bellow material AISI 316Ti which contains Titanium to withstand high temperatures. Alternatively, Inconel 600 or Inconel 625 improve fatigue strength and corrosion resistance as compared with stainless steel bellows. Similarly, Hastalloy C-276 offers greater corrosion resistance and fatigue strength than Inconel 625. Fatigue resistance can be improved by using a multiply bellows system and reducing the stroke length; this can significantly increase the bellow service life. Assessor Feedback Question 10 (6 marks) Do a comparative analysis of inboard and outboard mounting of seals. Inside-mounted seal is the most common in the industry and the most energy-efficient when compared with other sealing methods, such as packing and seal less equipment. They are used in all industries with respect to fluid types and the seals property ranges, pressure speed, diameter and temperature. Inside seals are mounted within the equipment seal chamber the advantages of this design include: The seal can be cooled by the pumped fluid in an enlarged dead-ended chamber, by a product bypass flush or by a clean external flush. Depending on the seal chamber design, the rotary action of the seal assembly may help keep debris away from the seal faces. With proper hydraulic balancing, the product pressure helps keep the seal faces closed. Catastrophic leakage is usually avoided during seal failure. Leakage can be restricted by the stationary elements in the gland. Inside seals are available in many materials and designs. Environmental controls are easily included in the design. Centrifugal forces tend to reduce leakage. Outside seals are mounted external of the equipment housing the advantages of this design include: Outside-mounted seals can be used when the radial or axial space in the chamber is not adequate or access is not available for an inside seal installation. Installation may be easier than with an inside seal. However, most equipment designs still require à ¢Ã¢â€š ¬Ã‚ ¨some disassembly. Less expensive materials may be used since à ¢Ã¢â€š ¬Ã‚ ¨many components may not be exposed to the pumped product. The seal can be observed and monitored for seal à ¢Ã¢â€š ¬Ã‚ ¨face wear. Adjustments can be made without à ¢Ã¢â€š ¬Ã‚ ¨equipment disassembly. The seal can often be backed-off for cleaning. Assessor Feedback Question 11 (8 marks) Explain the difference between static and dynamic seals? 0-rings are used for effective sealing in applications. Mostly, they are used to help repair or correct any manufacturing or installation defects seen in glands. 0-rings can be used in static as well as dynamic applications. The make of both these 0-rings will be different owing to the difference in application requirements. The following are some major differences between static and dynamic 0-rings: The material used to manufacture dynamic 0-rings should be tougher than that used to manufacture static 0-rings.This is because the dynamic 0-ring will have to undergo movement while the application is functioning. In dynamic applications, the surface finish and material of the gland should be such that it doesnt abrade the 0-ring during movement otherwise, the 0-ring could tear this is irrelevant in static applications, where the 0-ring doesnt move. 0-rings used in dynamic applications are likely to wear at a faster rate as compared to static 0-rings. This is because dynamic 0-rings are constantly moving. Hence, the interval of maintenance procedures for dynamic 0-rings should be shorter than that of static 0-rings. à ¢Ã¢â€š ¬Ã‚ ¢All 0-rings should be properly lubricated at all times. à ¢Ã¢â€š ¬Ã‚ ¢Dyna mic 0-rings require more lubrication than static ones. Depending on the application, static or dynamic seals will be used. O-rings are useful in a varied number of industries and applications. They are effective across a wide range of temperatures and pressures. However, using the right 0-ring for each application will help you increase the reliability and service life of the 0-ring. You can consult with your 0-ring manufacturer on the best fit for your application Assessor Feedback Question 12 (4 marks) Why are mechanical seals preloaded? Name four of the most common types of preloading for pump seals. Depending on the application it may be necessary to have either a positive or a negative operational clearance in the bearing arrangement. In the majority of applications, the operational clearance should be positive, i.e. when in operation, the bearing should have a residual clearance, however slight. However, in many cases, machine tool spindle bearings, pinion bearings in automotive axle drives, bearing arrangements of small electric motors, or bearing arrangements for oscillating movement, where a negative operational clearance, i.e. a preload, is needed to enhance the stiffness of the bearing arrangement or to increase running accuracy. The application of a preload, e.g. by springs, is also recommended where bearings are to operate without load or under very light load and at high speeds. In these cases, the preload serves to provide a minimum load on the bearing and prevent bearing damage as a result of sliding movements of the rolling elements, Helical Compression Spring, Wave Washer Springs, Single Belleville Washer Springs, Elastomeric Preloading Assessor Feedback Question 13 (4 marks) The table below contains a list of commonly used seal materials. For the given set of temperatures in degree centigrade, indicate the suitability of these materials by marking S for suitable and LS for limited suitability of short period durations. Type of Material Temperature in  ° C 50 100 200 300 350 Natural Rubber S S LS Nitrile S S S LS Neoprene S S S LS Viton S S S S S Silicone S S S S S Fluoro-elastomer S S S S S Question 14 (4 marks) What are the characteristics that make pure carbon-graphite the most favoured material in the chemical industry? Strongly anisotropic, Greasy feel, Readily marks, High thermal conductivity, High tensile strength, Low thermal expansion coefficient, Good resistance to thermal shock. Assessor Feedback Question 15 (4 marks) Ignoring temperature limitations, what type of elastomeric material would you suggest for the following applications? Sealing for Vacuum systems Buna-N, silicone, Fluorocarbon, and Perfluorocarbon Applications Vacuum systems Polyurethane Rotary shaft seals Fluorocarbon, Polyacrylate Applications that require high tear and abrasion resistance Natural Rubber Question 16 (4 marks) Why is it difficult to achieve a perfectly uniform load distribution across the shaft circumference, when using a single coil spring? What does this condition further lead to? What are the main advantages associated with the use of multi-coil springs? Typically, a single-coil spring used for a seal head has a relatively large wire cross section and therefore provides more substance to combat corrosion from the system fluid. But it is rigid in construction because of which there is difficulty in achieving a perfectly uniform load distribution across the shaft circumference. This may in turn lead to distortion of the primary seal ring face and this is particularly critical at high rotational shaft speeds. This arrangement consists of a series of small coil springs uniformly distributed along the circumference of the seal cartridge. The chief advantage with this design is that the possibility of distortion of the primary seal ring face is minimized and this is particularly true at higher rotational speeds of the shaft. The use of multiple-coil springs makes seal design independent of seal diameter sizes. Deterioration arising from chemical corrosion can be greatly minimized by the use of stainless steel for spring manufacture. Assessor Feedback Question 17 (4 marks) What is the three-point contact method? Explain in brief, the procedure involved. Three-point contact method where three setscrews positioned at 120 ° from each other ensure squareness of the rotating face, by deforming the sleeve to the shaft OD. Another set of three setscrews also located 120 ° apart and positioned between the earlier set of screws, enable locking of the sleeve to the shaft. Assessor Feedback Question 18 (4 marks) Metal impregnations are sometimes added to graphite seal rings in order to improve their properties. Give three areas of concern when selecting these metal additions. Both the metal filler and the carbon have to be compatible to the sealed liquid. The metal will heat up and expand more rapidly than the carbon. The coefficient of friction of the metal will be higher than the parent carbon and the seal face will run hotter than if it were made just from pure carbon. Assessor Feedback Question 19 (4 marks) Outline the nature of seal malfunction that may be caused by the following: Incorrect pressure differential between inside and outside seal face sets Cavitation or vaporization of liquid between sealing faces Thermal distress of material Large bearing clearances A change in temperature. Many products solidify at temperature extremes, the product is taking a pressure drop across the seal faces and solidifying. The inner face of a back to back double seal application is not positively locked in position. A snap ring must be installed to prevent the inboard stationary face from moving towards the rotating face when the high pressure barrier fluid pressure is lost or overcome by system pressure. Erosion / Corrosion. An accelerated attack caused by a combination of corrosion and mechanical wear. Vaporization, liquid turbulence, vane passing syndrome, and suction recirculation are special cases often called cavitation. Solids in the liquid and high velocity increase the problem Heat checking is caused by thermal distress of the material resulting in small radial cracks. Scoring may be present or uneven wear with the heat checking on the high spots. Occurs typically with tungsten carbides and silicon carbides Seal drips when stationary and when the shaft is rotating. Seal may pop from flashing during operation. The tendency for a seal to wedge is enhanced by a rough surface, lack of lubrication and high reciprocating speeds. Wedging is unlikely to occur with small clearance gaps in the range of 0.0550.127mm (0.002-0.005 inch). For clearances greater than 0.25 mm (0.010 inch) the possibility of wedging always exists as the radial clearance increases, the axial clearance increases as well the more room (radial clearance), the more the elements can shift in relation to each other. With a higher clearance there is more tolerance of thermal expansion effects, differential temperature between the inner and outer faces. Assessor Feedback Question 20 (4 marks) The leakage rate in a seal while running is found to be constant. Can the reason be attributed to a damaged seal face? State three important causes for each of the below: Intermittent leakage There is a leak between the face and the holder that becomes visible only when the unit comes up to operating temperature. A bending or bent shaft is causing the seal outside diameter to contact the inside diameter of the stuffing box, or some other stationary object. The shaft/ sleeve is too large in diameter and it is restricting movement of the seal. Spring loaded dynamic elastomers such as Teflon ® wedges, U- cups, chevrons and spring loaded O-ring designs are very sensitive to this problem Constant dripping in a seal. There is damage in the O-ring groove. Maybe the O-ring was removed with a sharp metal instrument and this has caused a scratch in the O-ring groove. Leaking between the gland and the stuffing box. This leak path is very visible in most applications Leaking between the cartridge sleeve and the shaft Question 21 (6 marks) It is a requirement to identify and select a suitable mechanical seal for a given application and process. What is the nature and type of questions that you would raise, in order to help arrive at the right selection? General Selection Considerations The process of mechanical seal selection involves a thorough evaluation of many important factors that include: Shaft diameter Rotational rubbing speed in the contact faces Service temperature Process fluid pressure Physical and chemical properties of the various liquid constituents Mechanical/structural properties of the primary seal components Environmental control systems Properties and resistance characteristics of the secondary sealing components. Pressure. Assessor Feedback Question 22 (4 marks) Which of the following conditions satisfy the requirements for sealing high-speed applications? Explain in brief: Lower spring load at seal faces Increased hydraulic balance ratio Face combinations such as carbon vs. tungsten carbide Stationary seal designs Number 4. Stationary seal designs: The Internal seal configuration, with the seal heads mounted stationary and the seal seats rotating with the shaft is advantageous, especially in high-speed applications where dynamic balancing considerations demand minimum mass of the rotating parts Assessor Feedback Question 23 (6 marks) A change in pumping fluid temperature adversely affect the seals in the stuffing boxes. What are the effects and How do you control the temperature in the stuffing box and the seal? a)Many fluids are adversely affected by a change in their temperature, and when this change takes place, seal failure is almost sure to follow. The failure can take several forms: Coated hard faces can heat check (crack). Elastomers can take a compression set and crack at elevated temperature Cold temperatures can cause elastomers to harden. The liquid can crystallize, restricting seal movement and open the faces. The liquid can vaporize between the faces forcing them open. The viscosity of the fluid can change either restricting seal movement, or making the fluid less of a lubricant. The liquids corrosion rate will double with an 18 ° Fahrenheit (10 ° C) rise in temperature. The liquid can convert to a film between the sliding seal components, restricting their movements. The magnetite that forms in hot water is a good example of this. A film can form on the seal faces causing them to separate. Lapped seal faces can distort and go out of flat at elevated or cryogenic temperatures. b) A balanced mechanical seal and installed at the proper compression, is your best insurance against a significant rise in stuffing box temperature: Proper face balance. 70/ 30 is the most common to 5000 fpm. (25 Meters per sec.) Low friction face materials. Carbon/graphite vs. a silicon carbide hard face is the best. The correct spring compression to control face loading. Faces with good heat conductivity. Tungsten carbide and silicon carbide have excellent thermal conductivity compared to most other hard face materials. A small cross section carbon/ graphite face press fitted into a metal holder is better than solid carbon/ graphite for removing heat from between the lapped faces. Sometimes, that is not good enough, so occasionally youll have to come up with some additional method of controlling the temperature in the stuffing box area and between the lapped seal faces. A heating /cooling jacket, quench flush or drain connection, dual seal, heat exchanger Assessor Feedback Question 24 (4 marks) The mechanical shaft seal should be selected according to the operating conditions at the shaft seal location. What important factors must be considered when selecting a mechanical shaft seal? For a specific ap

Crucible Character Analyses of Abigail Williams Essay

The play â€Å"Crucible† is set in Salem, Massachusetts, 1692; the government is a theocracy. Hard work and church consume the majority of a Salem resident’s time. Within the community, there are regular disputes over land; but disagreement over land boundaries is not the only simmering situation that becomes out of control. Abigail, the orphaned niece to Reverend Parris, is cast out of the house of John and Elizabeth Proctor because of her part in the infidelity and adultery committed with John Proctor. Her uncle is suspicious of her hasty exit, and even more so when he discovers her dancing in the woods. In order to avoid punishment, Abigail claims to be victimised by evil, thus causing madness that spread like wildfire through Salem, claiming many innocent souls. Yet the one who escaped punishment, Abigail, is not innocent. However, her crime, invisible to the eyes of the judges, for whom faith had replaced psychology, is not to have trafficked with the Devil; it is, with truly diabolic determination, to have brought about the ruin of the woman she cannot forgive for being married to the one she loves. Throughout the play, the people of Salem are consumed by paranoia and fear. Abigail is able to prey on that fear, as well as every other humanly weakness, and with her cunning, she is able to bend others to do her will. With a combination of lies and threats, as well as her capability to take advantage of paranoia and hysteria, Abigail seems to be an untouchable antagonist. When first introduced to the antagonist, we develop sympathy for Abigail, â€Å"enters – a strikingly beautiful girl, an orphan, with endless capacity for dissembling.† We are told that she is â€Å"strikingly beautiful† which undoubtedly gives us a brief visual aid of her appearance, author Arthur miller may have chosen to tell us this to suggest she is seductive and he emphasises the fact that she is â€Å"beautiful† with a powerful adverb, â€Å"strikingly†. We then become aware that she is an â€Å"orphan†, this uses the readers emotions to develop some sympathy for abigail, one could also suggest that with out that adult, mature, and older figure to nurture and advise abigail, she has not only become very independent, but possibly unaware of morals which maybe be the reason for the heartless actions she makes to get her way. In addition we are told that she has an â€Å"endless capacity of dissembling†, she is able to hide her true emotions/feelings in all situations, this tells us that she is a deceitful, lier but very intelligent, resourceful and highly mischievous girl. Already without abigail actually speaking, her impression has twisted and turned but is a mainly negative view. In addition when ‘interrogated’ about her where about and the events that took place the previous evening, we begin to see a ruthless character unfold, one can perceive Abigail’s talent in the area of villainy. She lies continuously in order to protect herself. She denies her role in the witchcraft as she is being questioned by Parris, â€Å"But we never conjured spirits†. Not soon after she also refuses to admit other events that took place. â€Å"No one was naked! You mistake yourself, uncle!†. It is obvious that Abigail is a compulsive liar. She sees no problem with concealing the truth and would use imperatives to manipulate people even her own family to ensure and change their thoughts and opinions. Abigail is known to some as a ‘Jezebel’ figure, someone who is commonly associated with the devil and scheming. Abigail’s evil can be seen through her interactions with the other characters in the play; she threatens Betty and Mary Warren, â€Å"Let either of you breathe a word, or the edge of a word about the other things and I will come to you in the black of some terrible night and i will a pointy reckoning that will shudder you† this shows a side to her that is devilish, threatening and in a way powerful, these threats are used to manipulate the other girls, to take part in her evil schemes only for her selfish gain.

The Newly Leaked Secrets to Narrative Essay Samples about Cross Culture Disclosed

The Newly Leaked Secrets to Narrative Essay Samples about Cross Culture Disclosed Secondly, culture itself is a significant variable. There are six different cultural patterns that normally vary from 1 person to some other individual. Cultural psychology knows human drive can't be explained by factors like genetic predisposition. The elements of cross cultural communication is reported to be culturally relevant in the very same manner the human experience is regarded as culturally relevant. The Truth About Narrative Essay Samples about Cross Culture Nothing less than exceptional is expected from every member, regardless of the age or year. A person's attitude may also be impacted by the manner that person was brought up by their parents, additionally, it can be influenced by someone's emotion and behaviour. For an individual visiting Denmark for the very first time, it should not be that difficult as the simple communication style here has universal greetings in practice. When communicating with Japanese it's deemed wise to concentrate to the face. An individual must show maturity of thought and action in handling people. Generally, it takes up to two hours of time to comb through dozens of sites until you discover something exciting to write about. The dying procedure is closely associated with religious practices, including prayers, hearing the confession of the dying, communion, and a blessing. Eventually, cross-cultural awareness is a critical part of every modern person's life because it can put her or him in a beneficial position or, on the flip side, destroy their image easily. All About Narrative Essay Samples about Cross Culture Lastly, examine your list and choose which idea you are able to write most strongly about. Any company seeking to expand past their borders would be wise to learn from Microsoft's error along with their success. For the purpose and discover the resolution, the IHRM should customize its approach to each matter that includes cross-cultural difficulties. This process contains two steps. Anyway, it's a fundamental part of the context which aids people to communicate with one another. When it has to do with language barrier, the method of speaking creates the utmost reason behind miscommunication. An individual should not presume that his way of communicating is the sole right method of communication in fact an individual should keep questioning about his assumptions about the proper way to communicate. In Japanese culture it's important to recognize that praising or prioritizing any 1 individual over others is very likely to be embarrassing. Understanding Narrative Essay Samples about Cross Culture Another part of the research is studying the effect of cultural identity on PepsiCo. Nonetheless, the demand for integration of the distinct cultures proves to be an essential part of development across all the several sectors of development all around the world. Now, with the evolution of contemporary technology, the world tends to be an international village. Sec ondly, it's critical to explore a culture which is also based on a value system. Moreover, both of these aspects are thought to be fundamental elements of the business's success. Lots of the cultural barriers that are usually related to diversity can be overcome in which this then will help to raise the awareness and sensitivity of cultural diversity administration. To conclude, cross cultural communication is of importance as it lets us appreciate the diversity in cultures and cause social development and thus it ought to be encouraged and practiced. In addition, there are minor peculiarities that the provider is supposed to think about. The Foolproof Narrative Essay Samples about Cross Culture Strategy This part of communication style is referred to as language usage. The aforementioned essay sample of the narrative essay is going to aid you in writing college essays assignments on various personal narrative essay topics. Aspects like the tone variation, pronunciation needs to be taken under consideration. You should be proficient in the topic, have an overall idea about the chosen issue and can get the best arguments to show your thesis. The Tried and True Method for Narrative Essay Samples about Cross Culture in Step by Step Detail To reach a productive use of chances and challenges related to managing across the cultures, it's crucial to design a training program. As the primary focus of IHRM is to recruit, select, maintain and retain talent that's needed by the organization, it must take a wide approach to satisfy its objectives in any region of earth. Time is among the more important challenges while working in Japanese culture as Japanese are extremely strict concerning the punctuality. It's possible to acquire theenvironmental pollution essay samplefrom the exact website aside from the other topics mentioned here. New Questions About Narrative Essay Samples about Cross Culture You're exposed to diversity and you reside in a diverse community depending on your post. No matter whom you are or where you reside or which culture you run from it's important to recognize that although other folks may dress like you or even get the job done for the very same company they aren't just like you. Culture functions as the foundation for relationships between women and men and between people and their surroundings. In effort to spell out the idea of death, many distinct cultures bring a substantial symbolic meaning to the dying process in regard to rituals, ceremonies, and bereavement practices.

Hotel On The Corner Of Bitter And Sweet By Jamie Ford

Maya Angelou once said, â€Å"I can be changed by what happens to me, but I refuse to be reduced by it.† This quote encompasses the idea that change is inevitable. A person is involved in numerous relationships during their lifetime and what happens within them can change who they become in the future. Within the novel, Hotel on the Corner of Bitter and Sweet by Jamie Ford, the relationships that Henry Lee has developed throughout his lifetime have shaped him into the person he is today. To begin, the relationship between Henry and his father has a huge impact on who he is today. Henry and his father never seemed to see eye to eye. The country of China, Mr. Lee’s childhood home, was the only place that his family belonged to in his eyes.†¦show more content†¦Marty and Henry have a relationship close to that of Henry and his own father. They do not talk much, and they have never been close. Ethel, Henry s wife was the glue that stuck the two men together. In essence, both men were bound to their fathers through their mothers. Marty is Henry s only son, and he himself had been an only child. After Ethel passed away, Marty came around more, and their relationship started to grow. Eventually Marty introduces Henry to Samantha, his girlfriend, and Henry seems to open up to an even further extent. He is very accepting of the fact that Sam is Caucasian, and not Chinese. Marty is surprised at this fact, and thus begins the unveiling of Henry’s past. Ma rty ultimately realizes that Henry is not his grandfather, and they take the first step into a stronger bond. Following the trips to the Panama Hotel, the two are more connected than they ever had been. Marty encourages his father to find Keiko again, and not to completely give up on his first love. Henry’s relationship with Marty helped him learn acceptance in a way that he will love Marty no matter the circumstances. He will sacrifice to no ends to make sure Marty is able to attend college, and that he is happy. Another key lesson that Henry learned is to follow his dreams, and that it is never too late to chase them. Marty and Samantha both encouraged HenryShow MoreRelatedAnalysis Of Hotel On The Corner Of Bitter And Sweet, By Jamie Ford986 Words   |  4 PagesThe novel â€Å"Hotel on the Corner of Bitter and Sweet,† written by Jamie Ford is a compelling novel about a young Chinese American boy name Henry. Henry is growing up after the Pearl Harbor incident and th e start of the internment camps for Japanese Americans. Henry’s ethnicity as a Chinese American affects his childhood in being bulled in school, having a distant relationship with his parents, and causes issues with his first love Keiko, a Japanese American girl. First, by looking at the way Henry’sRead MoreStages of Life in Hotel on the Corner of Bitter and Sweet by Jamie Ford1620 Words   |  6 PagesHotel on the Corner of Bitter and Sweet Jamie Ford’s novel Hotel on the Corner of Bitter and Sweet follows the life of Henry Lee at two diverse stages of his life. The book focuses on Henry’s life in 1942 when he was twelve-years-old and in 1986 when he is an old widowed father. The book begins with old Henry walking passed the Panama Hotel, which was in the 1940s a gateway between Seattle’s Chinatown and Japantown. The hotel has long been deserted, and boarded up since War World 2 and is underRead MoreLiterary Analysis: Hotel on the Corner of Bitter and Sweet as a Historical Fiction1280 Words   |  6 PagesLiterary Analysis: Hotel on the Corner of Bitter and Sweet as a Historical Fiction In Jamie Ford’s historical fiction Hotel on the Corner of Bitter and Sweet, this split narrative focuses on two eras: 1942 and 1986. Within these era’s, Ford’s novel focuses on a Chinese boy, Henry Lee, and what it was like to grow up in the international district with prejudice everywhere, especially in his own family being a first generation American. His novel tells the story of Henry, as well as a Japanese girlRead MoreAnalysis Of Hotel On The Corner Of Bitter And Sweet ``1404 Words   |  6 Pagesunconditionally, and someone who is there for life†. McCorkle’s description of a â€Å"gold friend† reminds me of a novel I recently read called â€Å"Hotel on the Corner of Bitter and Sweet† where friendship is universal and described as a bridge that connect all social gaps including gender, race and differences in abilities. Throughout the book, author Jamie Ford has succeeded to show readers that friendship is the most precious gift of life and it is also the most valuable thing to pursuit by giving detailsRead MoreHotel On The Corner Of Bitter And Sweet1528 Words   |  7 PagesThe historical fiction Hotel on the Corner of Bitter and Sweet by Jamie Ford is an almost quintessential illustration of the idea that love can exist anywhere without parameters. Clearly, this idea is seen with the relationship between Henry Lee, a Chinese American boy residing in Seattle, and Keiko Okabe, a Japanese American girl who falls victim to the atrocious Japanese American internment policy put forth by the United States government during World War 2. Despite the clashes and deep-seatedRead MoreThe And Hotel On The Corner Of Bitter And Sweet By Jamie For By James D. Houston1056 Words   |  5 Pagescamps, hoping one day the war can end and their freedom begin. In the two works, Farewell to Manzanar by James D. Houston and Hotel on the Corner of Bitter and Sweet by Jamie For, each portrays the struggles throughout the certain time period. Farewell to Manzanar presents the topic by using a series of dated journal entries, while Hotel on the Corner of Bitter and Sweet presents it as a topic and time period, with flashbacks to present day and the past. While both works depict the troubles Japanese-Read MoreAnalysis Of Hotel On The Corner Of Bitter And Sweet934 Words   |  4 PagesHotel on the Corner of Bitter and sweet Jamie Ford writes â€Å"Hotel on the Corner of Bitter and sweet† and the publisher of the book is Ballantine Books. They published the book in English on 1st February 2009. â€Å"Hotel on the Corner of Bitter and Sweet† story sets during one of the most conflicted and volatile times in American history. The time period of the story is after the Pearl Harbor boomed and the internment of American-Japanese families during the World War II. â€Å"Hotel of the corner bitterRead MoreHotel On The Corner Of Bitter And Sweet Analysis949 Words   |  4 Pagesâ€Å"True love is like ghosts, which everyone talks about and few have seen†. This is a quote said by Francois de La Rochefoucauld, which explains the rarity of true love. In Jamie Ford’s novel, Hotel on the Corner of Bitter and Sweet, the record of Oscar Holden symbolizes the relationship between Henry and Keiko, which is sensed as true love. Throughout the book, Henry and Keiko experience many ups and downs in their relationships which can be reflected by the treatment and condition of the record.Read MoreHotel on the Corner of Bitter and Sweet700 Words   |  3 PagesSet in the turmoil of WW2, Hotel on the Corner of Bitter and Sweet is a love of bitterness and sweetness book involving a Japanese girl, Keiko, and a Chinese boy, Henry. They strives to keep their relationship and deal with the consequences inflicted upon them by their parents and the wa r. As the story rolls along, many thoughts occurred that Henry and Keiko would be able to marry, but a twist happens, which results in their separation; unquestionably, Henry and Keiko moves on to have their own familyRead MoreHotel on the Corner of Bitter and Sweet2605 Words   |  11 PagesHotel on the Corner of Bitter and Sweet Book Review Summary of Hotel on the Corner of Bitter and Sweet Hotel on the Corner of Bitter and Sweet is a story that explores the experiences of Chinese and Japanese Americans during World War II with both insight and compassion. The story begins in 1986 with Henry, an elderly Chinese-American man walking past the Panama hotel in Seattle, which has been boarded up since the war. Memorabilia within the basement of the hotel take Henry back